ITE developes and supplies high quality ultrasonic pulser receiver modules for lab and industrial applications. UT pulser receivers are needed in a variety of applications for research, protoyping, and product development. Our knowledge of high frequency technique has resulted in very high class pulser receivers up to 50 MHz

We can supply ultrasonic spike pulsers and square wave pulsers for frequencies up to 50 MHz and as low as 10KHz with rf output only or rectified complete with gated peak detector.

DTG 1 Compact remote pulser receiver with TOF output

miniature ultrasonic pulser_receiver with TOF output

Model DTG1 has connectors for dual element and single element transducers. 50 volt square wave pulser with adjustable pulse width for transducer from 2 MHz to 15 MHz. Selectable gain up to 20 dB.

Originally designed for diver applications with remote thickness gauging.

The output delivers a continuous stream of the TOF readings.

Power supply: 10..14 V @ 0.2 A max
Pulser: 50 V square wave
Pulse width: 75..300 ns adjustable with potentiometer R26
Resolution: 0.1 mm
Measuring range: 2 .. 200 mm, depending on the used transducer
Gain: 20..55 dB, adjustable via RS485
Date: RS485, for twisted pair cable
Monitor: Symmetrical video, 2 V pp, sync negative
Detection: Positive, negative or both
Settings: Gain, Threshold, blanking, averages
Measuring principle of transmission pulse to the first echo measurement gate

ULTIMO-2000

Ultimo2000 UT pulser receiver

The widely used perfect ultrasonic pulser receiver unit for laboratory and production environment. Can be used as stand alone system with not more than 12 Volt DC and with serial ( RS232) PC interface. Although not of the latest generation, the analogue performance is unsurpassed.

Spike pulser and powerful square wave pulser.

The optional low impedance and 5 Volt rf output make the unit suitable for remote ultrasonic applications with a very long cable between the pulser receiver and detector system.

The ultrasonic bandwidth is 50 MHz at 80 dB true gain and the high energy square wave pulser can be controlled from 40 to 400 volt. The Ultimo2000 has both square wave pulser and spike pulser for high frequency transducers.

ULTIMO-3000

2 dual channel UT module

Dual Channel pulser receiver, flawdetector and thickness meter on one board for system integeration.
Frequency range 50MHz.

Remote control and data output by ethernet connection.

ITPR-922

PRU922_dual_channel_UT_pulser_receiver-r1

ITPR-922 has been developed for system applications of the MFD900 family.

  • Dual UT pulser receiver module
  • High power square wave pulser
  • 20 KHz PRF
  • 500 KHz -35 MHz
  • High gain -Low noise
  • 4 flaw gates, Interface gate
  • Water path- and Thickness meter ( 2 ns single shot 0.008 mm steel)
  • Gated gain control

Normally used in combination with a system control unit but once the parameters are set it works like a stand alone unit.

Please ask us for full specifications

ITPR-924

PRU900 Pulser receiver module

ITPR-900 has been developed for system applications of the MFD900 family.

  • Dual multiplexed UT pulser receiver module. PE and TR
  • High power square wave pulser
  • 10 KHz PRF per channel
  • 500 KHz -35 MHz
  • High gain -Low noise
  • 4 flaw gates, Interface gate
  • Water path- and Thickness meter ( 2 ns single shot 0.008 mm steel)
  • Gated gain control

Normally used in combination with a system control unit but once the parameters are set it works like a stand alone unit.

Please ask us for full specifications